- Product No: S-133
- Volume: 80mL (Enough for approx. 8 windshields)
- Function: Powerful cleaner for removing stubborn water spots and water stains (scale, water spots), Oil Films from window glass
- Abrasive: Contains a blend of two types of polishing agents
- Hard, fine particles to break down stubborn water spots
- Soft, larger spherical particles to smooth the surface
- Oil Film Removal: Also removes oily residues for improved visibility
- Surface Compatibility: For automotive glass only
- Not for Use On: Plastic, mirror surfaces, or glass with special coatings
- Application: Ideal for restoring clear vision by removing built-up stains and deposits
- Included: Comes with a sponge for easy application
How to use
- Always check the instructions before use, and keep the outer box for reference.
- First, rinse off sand and dirt from the glass.
※Be cautious as dirt can cause scratches.
※Since the glass surface is wet during the process, wiping off water droplets is unnecessary.
- Shake the bottle well with the cap closed, and apply an appropriate amount of the liquid to the included sponge (orange side).
- Gently polish vertically and horizontally, using an area of approximately 30 cm square as a guide.
※If the glass surface is dry initially, wet it with a small amount of water before application.
※Polish while checking the degree of dirt removal using a cloth dampened and wrung out with water.
※If the applied liquid on the working surface dries during the process, add more liquid or moisten it with a small amount of water to continue the process. (Be cautious as continuing to work with it dry may cause scratches.) - After polishing, thoroughly rinse the liquid with water.
Points
Ineligible Glass
Cracked glass, glass on the inside (interior) of the vehicle, side mirrors, and glass with special coatings such as antiglare, water repellent, hydrophilic, or tinted glass, as well as resin windows.
- Glass with low surface hardness may be susceptible to scratches, so be sure to polish an inconspicuous area before use, confirm it is suitable for use, and stop using if any issues arise.
- Rinse thoroughly as the liquid may remain in gaps or parts.
- If the liquid does not flow well, rinse with water while wiping off the liquid with a cloth.
- Wash the sponge with a neutral detergent after use, air dry it in the shade, and store it only after it has dried completely.
- Be cautious as excessive rubbing or strong rubbing may cause scratches.
- Depending on the condition of the water stains, it may not be possible to remove them even with this product.
Precautions
- Do not use for purposes other than intended.
- To avoid causing scratches, do not use in windy conditions or areas with a lot of dust, and avoid using a sponge that has been dropped on the ground.
- Do not use in intense sunlight or when the glass is hot.
- Coating may come off if used on glass that has been treated with water repellent.
- This product cannot remove scratches on glass.
- Be cautious when opening the cap, as the liquid may splash out.
- Do not leave the liquid applied for an extended period.
- If the liquid comes into contact with surfaces other than glass, immediately rinse with water. If it is difficult to remove, wipe with a soft, damp cloth.
- Do not use items such as felt, cloth, or polishers other than the included sponge.