LOOP Engine Coating

Product No: LP-41
Volume: 300mL
Formula: Synthetic oil (Group III) with nano-level additives including Fullerene C60 and specialized lubricants
Function: Maintains new engine condition by forming a durable friction-reducing film that enhances fuel economy and protects internal parts
Finish: Forms a strong lubricating “Loop Shield” coating that sustains engine cleanliness and smooth performance
Durability: Effect lasts over 10,000 km with long-lasting protection against wear, oil degradation, and noise
Abrasive: None – uses non-abrasive nano-particles for gentle internal conditioning
Sealing Effect: Improves cold start performance, reduces noise and vibration, and helps prevent dry starts
Application: Add 300mL during oil change (suitable for 3–6L oil capacity; 5–10% of total oil volume)
Surface Compatibility: Suitable for gasoline and diesel engines, high-octane, turbocharged, hybrid, kei cars, motorcycles, and vehicles with integrated clutch systems
Not for Use On: Not for external or non-engine components
Included: Application-ready – simply pour into the engine oil reservoir

How to Use

※ Securely attach the nozzle provided with the container and pour the product into the engine oil filling port.

Stop the engine and use caution to avoid burns.
Pour the product into the engine oil filling port, ensuring not to exceed the specified oil quantity.
After pouring, close the oil cap, idle for about 5 minutes, and confirm with the oil gauge that the oil level is within the specified range.
※ For 3-6L of engine oil, one bottle of this product (5-10% of the oil quantity) is recommended.
※ To effectively use this product, it is advisable to add it with every oil change.
※ After pouring, replace the oil according to the recommended oil change interval by the vehicle manufacturer.
※ Depending on the engine, engine oil condition, and driving conditions, the performance of this product may not be fully realized.
※ This product cannot be used in combination with other additives.

Use only for the intended purpose.
When using, strictly adhere to the usage instructions and recommended dosage.
Do not use for motorcycles, two-wheel vehicles, or 2-cycle engines.
Be cautious when opening the cap, as liquid may splash if the container is held forcefully.
Perform the operation in a well-ventilated area.
During pouring, take care to prevent dirt or water from entering the engine.
Do not use when the engine is hot (immediately after driving, etc.).
If the product comes into contact with the engine or painted surfaces, immediately wipe it off.
Do not use in combination with other additives.