- Product No: LP-45
- Volume: 300mL
- Formula: Synthetic oil (Group III + ester) with special leak-stopping agents and cleaning additives
- Function: Repairs and seals oil leaks by directly acting on deteriorated rubber seals and gaskets, preventing oil seepage and drips
- Finish: Restores flexibility to valve stem seals, reducing oil consumption caused by oil seepage
- Durability: Long-lasting effect; does not require addition at every oil change (recommended reapplication every ~20,000 km for prevention)
- Abrasive: None – safe, contains no harmful substances such as chlorine
- Sealing Effect: Penetrates and cleans around seals and gaskets, restoring elasticity and preventing leaks economically
- Application: Add entire 300mL during oil change for engines with 3–6L oil capacity (5–10% of oil volume)
- Surface Compatibility: Suitable for gasoline engines, diesel engines, high-octane/turbocharged engines, hybrid vehicles, kei cars, integrated clutch vehicles, and motorcycles
- Not for Use On: Not compatible with 2-stroke engines or rotary engines
- Included: Ready to use, pour into oil reservoir
How to Use
※ Securely attach the nozzle provided with the container and pour the product into the engine oil filling port.
- Stop the engine and use caution to avoid burns.
- Pour the product into the engine oil filling port, ensuring not to exceed the specified oil quantity.
- After pouring, close the oil cap, idle for about 5 minutes, and confirm with the oil gauge that the oil level is within the specified range.
※ For 3-6L of engine oil, one bottle of this product (5-10% of the oil quantity) is recommended.
※ To effectively use this product, it is advisable to add it with every oil change.
※ After pouring, replace the oil according to the recommended oil change interval by the vehicle manufacturer.
※ Depending on the engine, engine oil condition, and driving conditions, the performance of this product may not be fully realized.
※ This product cannot be used in combination with other additives.
Precautions
- Use only for the intended purpose.
- When using, strictly adhere to the usage instructions and recommended dosage.
- Do not use for motorcycles, two-wheel vehicles, or 2-cycle engines.
- Be cautious when opening the cap, as liquid may splash if the container is held forcefully.
- Perform the operation in a well-ventilated area.
- During pouring, take care to prevent dirt or water from entering the engine.
- Do not use when the engine is hot (immediately after driving, etc.).
- If the product comes into contact with the engine or painted surfaces, immediately wipe it off.
- Do not use in combination with other additives.
Recommendation
