- Product No: S-89
- Volume: 100mL
- Type: Water-based (pH-neutral)
- Formula: Emulsion-type – easy-to-apply, non-drip coating
- Finish: Restores the tire’s natural deep black color with a subtle, moisturized shine
- Durability: Long-lasting protection for up to 6 months
- Protection: Shields tires from dirt, fading, and degradation
- Ease of Use: Creamy, non-splash formula ensures clean application without splattering onto wheels or body panels
- Tire Friendly: Water-based and silicone-enhanced formula is gentle on rubber
- Multi-Surface Use: Can also be used on unpainted plastic parts
How to use
- Before use, be sure to check the instructions and store the outer box without throwing it away.
- Pre-rinse dirt from the side of the tire.
- If dirt or oil is attached, sufficient effects may not be obtained.
- To fully demonstrate the effect, wipe off moisture thoroughly with a dry, clean cloth.
- Shake the bottle well with the cap closed, and drop an appropriate amount of liquid onto the included sponge (soft side).
- Evenly spread and extend it on the tire/unpainted resin parts, and it is complete after drying.
※ Depending on the season, drying time may vary.
※ To finish without unevenness, lightly wipe the applied surface with a dry, clean cloth.
※ When applying to the tire, applying from the bottom to the top of the tire can prevent dripping.
※ When using on unpainted resin parts, masking around the application area will result in a clean finish.
※ For wiping, SurLuster ‘Microfiber Cloth’ is recommended.
Precautions
Can be used on: Automobile tire sidewalls, other exterior rubber parts (weather strips, etc.), unpainted resin parts (bumpers, grills, cowl top panels, side mirror bodies, door handles, moldings, covers in the engine compartment, etc.)
Cannot be used on: Painted surfaces, wheels, fabric, leather, glass, wood, clear parts, soft tops, interior parts such as seats, handles, and shift knobs, electronic devices such as car navigation systems, monitors, and meters, resin parts with glossy finishes, etc.”
- Before use, test in an inconspicuous area, and discontinue use if any problems arise.
- Avoid using on tire contact surfaces or tires of two-wheeled vehicles, as it may cause slipping or falling.
- To prevent scratches, do not use in windy conditions or areas with a lot of dust, and avoid using a sponge that has been dropped on the ground.
- Do not use when tires or unpainted resin parts are hot or in intense sunlight.
- Exercise caution when opening the cap, as there is a risk of the liquid splashing.
- Use only the included sponge during application.
- Do not leave the applied liquid on surfaces for an extended period.
- If the liquid comes into contact with surfaces other than tires or unpainted resin parts, promptly wipe it off, and avoid allowing it to come into contact with brake components or clothing.
- After use, wash the sponge with a neutral detergent, air dry it in the shade, and store it only after it has dried completely.